Tremec has built a functioning manual transaxle for the mid-engine Chevrolet Corvette C8, and it has demonstrated the conversion in a one-off race car at a private circuit in Michigan.
The C8 marked two firsts for Chevrolet: the engine moved behind the driver, and the car was offered only with a dual-clutch automatic. Equipping a mid-engine layout with two new transaxles — one manual, one automatic — was, in the reviewer's telling, more than General Motors was prepared to fund. His reading of the decision is that executives weighed a small and shrinking group of manual enthusiasts against the prospect of beating far more expensive rivals in comparison tests, and chose the automatic.
Tremec is the supplier behind the TR-6060 six-speed used in GM performance models, including both Blackwing sedans and the also-departed Camaro. Its manual C8 development vehicle, despite rumors to the contrary, is real.
A lap in the converted car
Tremec brought the reviewer and several potential customers to Motorsports Gateway, a new private track outside Howell, Michigan, that is not yet indexed by search engines, to sample its transmission range. The car on offer was a Peitz Performance C8 race car fitted with the manual gearbox — a one-off build.
It is a competition machine rather than a road car. Interior trim is absent, the lever protrudes from the space normally occupied by the storage cubby and automatic selector, and a full cage and harness are fitted. Seat adjustment is essentially nonexistent, and the reviewer, at 5 ft 7 in, could not comfortably reach the pedals or brace himself through corners, which limited how hard he drove on a green track on a November afternoon.
Installation and shift quality
Peitz had to cut the tunnel to mount the clutch pedal hardware, but the gearbox occupies the same position as the stock dual-clutch unit and needed no bespoke mating components. The pedal box, surprisingly, has room for a third pedal and feels more spacious than a previous-generation Camaro's.
The shifter is mounted remotely and linked to the transaxle by cable, unlike the direct mechanical connection of the front-engine TR-6060. The result is a slightly less precise, less notchy shift that smooths some of the gearbox's rougher edges; some drivers will prefer it, while others will miss the mechanical feel. The reviewer notes that the only fixes would be moving the engine forward — which yields a C7 — or the shifter rearward.
Cost and customer interest
The economics are the sticking point. The gearbox alone is quoted at about $75,000, and combining it with the price of a Corvette pushes a converted car into the region of a showroom-spec Z06. Tremec expects that figure to fall as volume rises. The company says manufacturers are interested — not necessarily, and certainly not exclusively, GM — as other automakers look for a high-torque manual transaxle, though no names were disclosed.
