SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor that extends its SGI Series portfolio. The sensor is designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. It uses an expanded laser spot and optical triangulation, and the company is targeting lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where reliable micrometre-level measurement is required.
Conventional point-spot laser displacement sensors concentrate reflected energy on a small area, according to the company. Microscopic scratches, grain boundaries, brushed textures and matte finishes can therefore produce signal variations that are read as dimensional changes, potentially triggering false defect warnings and extra inspection. The SGI-N030W’s wide-spot configuration collects reflected light from a broader area and averages local microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Specifications and interfacing
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, corresponding to a 20 µs update interval, supports high-speed measurement and monitoring of dynamic processes. Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.
Battery electrode thickness
One principal application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material, while periodic spot checks cannot provide continuous coverage across a production reel. In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. A controller combines the opposing clearance measurements with the fixed mounting datum to calculate absolute thickness in real time. According to SinceVision, production trials achieved stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate supports longitudinal resolution for detecting local coating agglomerations, edge thinning and exposed substrate before cell winding.
Semiconductor and motion applications
For semiconductor manufacturing, the sensor is intended for non-contact work with sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers. The sampling rate allows capture of transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full measurement range. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.
Addressing surface-related errors
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating demand for additional manual inspection. The SGI-N030W’s expanded optical spot is designed to average out these surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification. The performance figures cited are manufacturer specifications and trial results described by SinceVision.
