Industrial Machinery

KraussMaffei Extrusion Develops Single-Stage PVC InlineMixing for Roofing Membranes

A continuous direct-dosing process eliminates separate dryblend mixing and targets lower energy, space and labor costs.

Camila RestrepoNovember 17, 20265 min read1 views
A concept illustration shows a compact continuous extrusion and calendering line for PVC roofing membranes, with gravimetric feeders directing solids and liquids into a twin-screw extruder.

KraussMaffei Extrusion has developed a new single-stage extrusion process for PVC roofing membranes. The PVC InlineMixing process is designed to replace the conventional two-stage route in which a separate heating-cooling-mixing combination first produces a dryblend. According to the company, the continuous process can reduce energy costs, shorten production time and support a rapid return on investment.

In the traditional route, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer to create a dryblend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and formed into membranes. With PVC InlineMixing, all solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the required proportions.

Lower costs and smaller footprint

KraussMaffei Extrusion says the new process improves cost-effectiveness in several ways. Manufacturers do not need to invest in a separate heating-cooling-mixing combination, and the material is heated only once. Depending on the formulation, system parameters and location, the company reports that energy consumption and energy costs can be reduced by up to 75 percent.

Removing the separate mixing step also lowers space requirements and labor costs, while maintenance costs fall because wear parts for the heating-cooling mixer are no longer needed. The combination of lower capital expenditure and lower operating costs is intended to improve overall cost-effectiveness and create the conditions for a quick return on investment.

Formulation changes during operation

The continuous process is also presented as more flexible. Formula adjustments and color changes can be made directly during operation through the integrated control system, avoiding the time-consuming preparation and interim storage of separate dryblend batches.

Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said manufacturers could gain a competitive advantage through lower production costs, greater flexibility and more efficient manufacturing. He added that they could respond more quickly to new requirements, adjust formulations during production and reduce energy and capital expenditure.

Validation and industrial reference

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65, and the combination of high torque and large free volume is intended to provide a wide process window for different formulations.

Tests confirmed what the company describes as excellent gelation levels of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the Technology Center works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h using two extruders and two calenders. In this process, PVC, additives and fillers, together with edge trimmings, are continuously processed directly into finished membranes.

KraussMaffei Extrusion presents the process as a way to combine high product quality with a leaner production route for more cost-effective and flexible PVC roofing membrane manufacturing. The reported energy savings remain dependent on formulation, system parameters and location.